The loss of sanding your floors by your own

Floor sanding is a process with three stages: preparation, sanding and coating with a protective layer. Each stage is important by its own, because if one of them is not done properly it can ruin your floor. Usually floors which are suitable for this are between 7 and 10 year old, but of course it depends on how you treat the floor too. You can do floor sanding every ten years, but that depends on how many layers is your wood floor made of too.

Some of them also may need a major or minor repairs. The repairs may include: removing or replacement of damaged boards, fixing any loose floorboards, removing old tracks and rusted nails, protruding nails are hammered and many more.The floor need to be whole and flat. The room need to be prepared too. It needs to be “naked”, removing carpets, electronics, furniture etc. Then you will need to inspect that every detail of the first mentioned have been done properly. Now the actual floor sanding can begin. The second step of the floor sanding include removing the old layer of sealants and its paint. This is done by have machines. If you decide to do this by your own, you will need belt sander, edge sander, finishing sanders, dust extractor, random orbitals and detail sanders so it is better to search for a proper company.

The good brand machines like this are expensive, that’s why I mentioned floor sanding companies are sometime more inexpensive. Also must know fact is that you will need to wear a suitable respirator mask and suit. When the upper lair of your wooden floor is being removed, sometimes you may see unpleasant surprise underneath – worms eaten cores. This problem can affect floor appearance and its value. Also, if the situation is really bad you may need to replace the whole floor. This stage is optional. Staining is another name for painting. If you want to change the colour of your wood, the moment after sanding and before polishing is the time.

Of course, a special paint needs to be used. Sometimes you will need to put some more layers of the paint to get the wanted colour. The last stage from sanding your wooden floor is sealing and you can decide what to use – a  natural oil or hard wax oil or lacquer. This last touch is protecting your floors from stains, weather conditions, furniture, and human harming.

If you are going to search for a professional sanding company, you need to contact with our fine experts!

Advertisements

Dartford Floor Sanding

Make choices about your wooden floor

It’s a classic. The wooden floor in each room gives comfort, tranquillity and warmth.
If you’re thinking of putting in wood floors, you can’t go wrong. All types of hardwood floors have natural beauty and go with any decor — modern, traditional, country, you name it. Hardwood flooring goes in any room, although kitchens and basements require special considerations.
Hardwood gives those spaces an instant classic feel, traditional look and straddles the different styles and colors your kitchen may experience over the years.
Hardwood flooring doesn’t have to be a sea of brown. Universally available finish colors suggest wonderful array of whites, browns, blacks and reds.

Dartford FLoor Sanding

The wood material

Solid wood flooring can be vulnerable at times. Various finishes using varnishes, oils etc. can be damaged due to suns heat or the pouring of lots of water as well as humidity during the rainy season. The furniture, pets, high-heeled sandals, heavy vacuum cleaner, stains from ink or similar sources etc. can be other sources of dent and stains on the solid wood flooring.All these dents and stains can make the solid wood flooring look quite ugly and it is quite sure, you would like to stop all these.

That’s why you have to check our web sait and make your free call whit us !

SOFTWOODS top 3

SOFTWOODS top 3 

PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.

Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.

ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.

Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.

HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.

Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.

The Best Ways to Clean Hardwood Floors

The Best Ways to Clean Hardwood Floors

-Prep your floor for cleaning by sweeping or dust-mopping to get rid of large particles of dirt and debris.
-Use a pH neutral cleaner that will be gentle on your hardwood floors.
-Use a fine spray mist to clean your floor in sections. Avoid putting too much liquid on your floors.
-Use a microfiber mop to clean. Traditional mops can work, but they can leave excess water on your floors.
-Skip using white vinegar and water to clean your floors. Using a specially formulated hardwood floor care cleaner is a smart way to maintain the beauty and look of your floors.